TestManagerPro communicates with series instruments via the serial port in PC. It can support uploading the stored data from the instrument, viewing and printing the stored results. You can easily check, manage and analyze every test result on your PC. Another very important function of TestManagerPro is that you can on-line upgrade the embedded software in the instrument with this PC software.
1. Basic functions of TestManagerPro
- Select the type of the instrument
- Connect the instrument
- Upload the test results which stored in the instrument
- View the stored results
- Analyze the stored results
- Clean up the records uploaded
- Plot out the test results with the graphics, table or text mode
- Upgrade the embedded software
- Help
2. Basic configurations required
- PC: 586/133MHz or better
- Memory: above 16MB
- Hard disk: above 50MB
- CD-ROM drive for installation
- Standard mouse and keyboard
- USB Connector
- Windows-compatible printer or plotter
3. Operating System
4. System Configuration Recommendation
- System display mode: 800x600 Pixels
- Install the printer or plotter before setup
|
